per
دکتر روح اله طاهرخانی
مهندسی و مدیریت ساخت
۲۵۳۸-۱۹۰۳
۲۵۳۸-۲۵۷۸
2016-11-21
1
3
7
11
48034
بررسی عملکرد شمعهای حفاظتی بر کنترل و کاهش آبشستگی پایه پل های استوانه ای
Evaluate The Performance Of The Control And Reduction Of Scour Protection Of Bridge Piers Cylindrical Candles
سید امیرحسین محمودی
amir.mahmoodi1991@gmail.com
1
منوچهر حیدرپور
2
دانشجوی کارشناسی ارشد گروه مهندسی آب دانشکده کشاورزی دانشگاه صنعتی اصفهان
استاد گروه مهندسی آب دانشکده کشاورزی دانشگاه صنعتی اصفهان
مسئله آبشستگی یکی از مهم ترین مسائل در بحث مهندسی رودخانه میباشد. سالانه تعداد بسیار زیادی از پل ها در سراسر جهان تخریب میشوند که عمدتاً به دلیل سازه ای نیست. بلکه به دلیل در نظر نگرفتن نقش هیدرولیکی در طراحی آن ها میباشد. تعیین عمق آبشستگی از این جهت که بیانگر میزان پتانسیل تخریب جریان در اطراف سازه بوده دارای اهمیت است. ازاین رو پیشگویی الگوی آبشستگی برای ایجاد ایمنی در سازه هایی که در معرض آب قرار دارند امری ضروری است. از جمله روشهای کنترل و کاهش آبشستگی موضعی میتوان از استفاده از زبری ها، طوق، صفحات مستغرق و شمعهای حفاظتی نام برد. در تحقیق حاضر به بررسی تأثیر شمع های حفاظتی در کنترل و کاهش آبشستگی در اطراف پایه های استوانه ای پرداخته شده است. در این مطالعه از شمع های حفاظتی با آرایش مثلثی و تعداد ثابت 5 شمع استفاده شده است. در این مطالعه با ثابت در نظر گرفتن اغلب پارامتر ها در آرایش شمع های مورد نظر، تنها با تغییر دو پارامتر اصلی زاویه راس و فاصله افقی شمع ها از یکدیگر متمایز می گردند. آرایشهای مورد آزمایش در دو زاویه راس 30 و 45 درجه و فاصله افقی شمع ها از یکدیگر 0.7، 1، 1.3 برابر قطر پایه، بر روی پایه با قطر 3 سانتیمتر مورد آزمایش و مقایسه قرار گرفته اند. نتایج آزمایشها نشان داد با کاهش زاویه راس و یا کاهش فاصله افقی شمعها راندمان شمعها افزایش می یابد.
Scouring is one of the most important issues in river engineering. A large number of bridges are destroyed worldwide every year, largely due to construction. But because they do not consider the role of hydraulic design in their design. Determining the depth of scouring is important because it indicates the potential for destruction of the flow around the structure. Therefore, it is necessary to predict the scouring pattern for safety in structures that are exposed to water. One of the methods for controlling and reducing scouring can be the use of roughness, collar, submersible plates and protective piles. In the present study, the effect of protective piles on controlling and reducing scour around the cylindrical supports has been investigated. In this study, protective candles with triangular arrangement and constant number of 5 candles were used. In this study, with the constant consideration of most of the parameters in the arrangement of the desired piles, only by changing the two main parameters of the angle of the vertex and the horizontal distance of the piles are distinguished from one another. The facials tested were tested and compared on a base of 3 centimeters at two angles of the vertices of 30 and 45 degrees and the horizontal distance of the piles of 0.7, 1, 1.3 times the diameter of the base. The results of the experiments showed that the efficiency of the pile is increased by decreasing the vertex angle or reducing the horizontal distance of the piles.465
https://www.jecm.ir/article_48034_3b82ee4b4e16772731a819e0181014f9.pdf
per
دکتر روح اله طاهرخانی
مهندسی و مدیریت ساخت
۲۵۳۸-۱۹۰۳
۲۵۳۸-۲۵۷۸
2016-11-21
1
3
12
15
48035
بررسی اثر دیواره های قوس دار بر پارامترهای هیدرولیکی جریان در سرریز پلکانی
The Effect Of Flow On Stepped Spillway Walls Of The Arch Parameters
سیده مهدیس کنعانی
mahdis.kanani88@gmail.com
1
رامین فضل اولی
2
علیرضا عمادی
3
جانعلی تقوی
4
دانشجوی کارشناسی ارشد سازه های آبی، دانشگاه علوم کشاورزی و منابع طبیعی ساری
استادیار، عضو هیأت علمی گروه مهندسی آب، دانشگاه علوم کشاورزی و منابع طبیعی ساری
دانشیار، عضو هیأت علمی گروه مهندسی آب، دانشگاه علوم کشاورزی و منابع طبیعی ساری
مربی، عضو هیأت علمی گروه مهندسی آب، دانشگاه علوم کشاورزی و منابع طبیعی ساری
شکل پذیری جریان در آستانه ورود به سرریز متأثر از شکل هندسی دیواره هدایت جریان بوده که در صورت طراحی مناسب می تواند موجب کاهش معنی دار ضریب دبی گردد. برای این منظور در تحقیق حاضر از مدل فیزیکی یک سرریز پلکانی و سه دیواره هدایت قوسدار با زوایای مختلف نسبت به امتداد جریان استفاده شد. نتایج به دست آمده در این تحقیق نشان داد با افزایش هد بالادست برای هر سه دیواره هدایت جریان، عرض مقطع انقباض کاهش می یابد. همچنین در یک هد بالادست ثابت، متوسط عرض مقطع انقباض در دیواره هدایت با زاویه 60 درجه دارای بیشترین مقدار بوده است. با افزایش هد بالادست ضریب دبی کاهش یافت، از سوی دیگر تغییرات ضریب دبی نسبت به دبی برای هر سه حالت دیواره هدایت قوسدار، از یک روند نزولی برخوردار بوده است. در نهایت مشخص شد در یک هد ثابت، میزان دبی عبوری از سرریز درهر سه دیواره هدایت، تفاوت معناداری با هم ندارند.
The flow ductility at the threshold of entry into the overflow is affected by the geometric shape of the conduction wall, which, if designed properly, can reduce the discharge coefficient significantly. For this purpose, in the present study, a physical model of a stack overflow and three arched conductor walls were used with different angles to flow paths. The results obtained in this study showed that by increasing the upstream head for all three conduction walls, the width of the contraction section is reduced. Also, in a steady upward head, the average width of the shrinkage cross section in the guiding wall with the 60 degree angle was the highest. By increasing the head upstream, the coefficient of discharge decreased, while the variation of the discharge coefficient in relation to the flow rate for all three arc-conductor walls was a downward trend. Finally, it was found that in a constant head, the amount of flow through the overflow in each of the three conductive walls did not differ significantly.
https://www.jecm.ir/article_48035_cdf207a0b7f62fa88cd7d6d4160b1e70.pdf
دیواره هدایت قوسدار
سرریز پلکانی
ضریب دبی
per
دکتر روح اله طاهرخانی
مهندسی و مدیریت ساخت
۲۵۳۸-۱۹۰۳
۲۵۳۸-۲۵۷۸
2016-11-21
1
3
16
19
48036
اثر سدهای تأخیری در کنترل و مهار سیلاب رودخانه های شهری مطالعه موردی(حوضه آبریز رودخانه وردآورد)
The Effect Of Detention Dams On The River Urban Flood Control Case Study (Vardavard River Catchment)
بهرنگ نورکرمی
behrangnk@yahoo.com
1
محمدعامل صادقی
2
حسام وطن دوست
3
دانش آموختة کارشناسی ارشد مهندسی آب و سازه های هیدرولیکی، گروه عمران، واحد صفادشت، دانشگاه آزاد اسلامی، صفادشت، تهران، ایران
استادیار و عضو هیئت علمی دانشگاه آزاد اسلامی واحد تاکستان
استادیار و عضو هیئت علمی دانشگاه آزاد اسلامی واحد رباط کریم
جهت بررسی تأثیر مخازن تأخیری در کاهش سیلاب حوضة مورد مطالعۀ این تحقیق (حوضۀ منتهی به شهر تهران)، ابتدا پس از ساخت سیلاب طراحی و روند یابی آن، تأثیر سیلاب در پایین دست بدون در نظر گرفتن مخازن بررسی می گردد، سپس با استفاده از نرم افزارHEC-HMS حوضۀ مورد نظر و مخازن در نظر گرفته شده دربالادست حوضۀ شهری، مدل و عملکرد این مخازن در کاهش هیدروگراف سیلاب ورودی بررسی می گردد. نتایج نشان داد با استفاده از سدهای تأخیری میزان دبی، خروجی از حوضه وردآورد به شدت کاهش می یابد. اثر کاهش دبی پیک سیل ناشی از احداث سدهای تأخیری در حوضه وردآورد برای سیلاب با دوره های بازگشت2، 5، 10، 25، 50، 100 ساله به ترتیب91.4 ،58.1 ،89.9 ،92.141.7 و 28.5 درصد میباشد. همچنین با افزایش دورة بازگشت سیل تأثیر این مخازن در کاهش سیلاب خروجی حوضه، کاهش می یابد.
In order to investigate the effect of delayed reservoirs on reducing the flood of the basin studied in this study (basin to Tehran), first, after designing and managing the flood, the effect of the flood is considered downstream without considering the reservoirs, then using The HEC-HMS software for the basin and reservoirs considered at the high basin of the urban basin, the model and performance of these reservoirs are considered in reducing the inflow hydrograph. The results showed that using Delayed Dams in Dubai, the output from the Watershed basin is greatly reduced. The effect of the reduction of peak flood discharge due to the construction of delayed dams in the Watershed basin for flood with return periods of 2, 5, 10, 25, 50, 100 years old is 91.4, 58.1, 89.9, 92.141.7 and 28.5%, respectively. Also, with the increase of the flood return period, the effect of these reservoirs decreases in reducing the flood discharge of the basin.
https://www.jecm.ir/article_48036_3689a011162a7a4255e7f23eed62c635.pdf
سدهای تأخیری
حوضه وردآورد
کنترل سیلاب
per
دکتر روح اله طاهرخانی
مهندسی و مدیریت ساخت
۲۵۳۸-۱۹۰۳
۲۵۳۸-۲۵۷۸
2016-11-21
1
3
20
23
48037
اثر طول زهکش افقی بر دبی نشتی، نیروی زیرفشار و گرادیان هیدرولیکی در سد خاکی همگن توسط شبیه سازی عددی
The Effect On The Leakage Flow Along The Horizontal Drainage, Power, Drifted And Hydraulic Gradient In Homogeneous Earth Dam By Numerical Simulation
علی محمود
ali.mahmoud.edu@gmail.com
1
محمد بدخشان
2
ابوذر صیفی
3
کارشناس ارشد مهندسی سازه های آبی دانشگاه آزاد اسلامی واحد کرمان
کارشناس ارشد مهندسی سازه های آبی دانشگاه تبریز
کارشناس ارشد مهندسی سازه های آبی دانشگاه تبریز
به دلیل نقش موثر سد های خاکی در تامین نیاز های آبی و نیز ایجاد خطرات بالقوه برای جوامع پایین دست آنها، مسائل مربوط به ایمنی سدهای خاکی ضمن ساخت و نیز در دوران بهره برداری از اهمیت خاصی برخوردار است. در این تحقیق به مطالعه و مقایسه کارایی استفاده از زهکش افقی، در کاهش اثرات سوء نشت از مقطع یک سد خاکی همگن فرضی پرداخته شده است. دبی نشت از پی و بدنه و نیز گرادیان خروجی حداکثر در پنجه سد با بهره گیری از نرم افزار Seep/W مبتنی بر روش اجزای محدود محاسبه گردید. نتایج این تحقیق نشان داد که افزایش طول زهکش افقی متناسب با دبی نشتی از سد بوده و نسبت عکس با نیروی زیر فشار دارد. همچنین با افزایش طول زهکش افقی کمی بر گرادیان هیدرولیکی افزوده می شود، ولی افزایش آن در محل آب خروجی از پنجه نبوده و لذا خطر ساز نخواهد بود.
Due to the effective role of earth dams in providing water needs and the potential hazards for their downstream communities, the issues of the safety of dams are in the making and also during the exploitation period is of particular importance. In this study, the effect of horizontal drainage on the reduction of the effects of leakage from a cross section of a homogeneous earth dam has been studied and compared. In addition, the leakage from the body and the maximum output gradient at the dam was calculated using the Seep / W software based on finite element method. The results of this study showed that the increase in the length of the horizontal drain is proportional to the discharge leakage from the dam and the photo ratio is under pressure. Also, with an increase in the length of the horizontal drain, the hydraulic gradient is slightly increased, but its increase in the outlet is not affected by the gravity, and therefore it will not be dangerous.
https://www.jecm.ir/article_48037_4018c49a95247193ec93b86c366ae58b.pdf
per
دکتر روح اله طاهرخانی
مهندسی و مدیریت ساخت
۲۵۳۸-۱۹۰۳
۲۵۳۸-۲۵۷۸
2016-11-21
1
3
24
27
48038
مرمت، شبیه سازی و نوآوری سازه های بدیع آبی : راهگشای میراث آیندگان ایران
Repair, Simulation And Innovation Water Innovative Structures: A Guide For Posterity The Heritage Of Iran
مهدی یاسی
m.yasi@ut.ac.ir
1
گروه مهندسی آبیاری و آبادانی، پردیس کشاورزی و منابع طبیعی دانشگاه تهران
پیشینه تمدن ایران، در جهان شناخته شده است. وجود سازه های آبی در ایران مانند سدها، بندها، اشترگلوها، مقسم ها، آسیاب های آبی و آ بانبارها، قرن ها قدمت داشته، و نشان از ژرفنگری ایرانیان و دانش فراوان آنان از مهندسی آب در آن دوران دارد. برخی از این آثار همچنان در حال بهره برداری هستند؛ برخی نیز بازسازی شده و بخوبی کار می کنند؛ و تعدادی نیز مرمت و حفاظت شده، ولی کاربری آنها به سازه های مشابه و جدید در جوار آنها واگذار گردیده است. هدف اصلی از مقاله حاضر، معرفی نمونه هائی از سازه های آبی شاخص ماندگار در قلمرو ایران، ضرورت حفاظت و مرمت برخی سازه های موجود، و نوسازی سازه های بدیع برای ماندگاری میراث تاریخی ایران است. همچنین نوآوری در طرح و ساخت سازه های آبی جدید بعنوان میراث تاریخی و فرهنگی عصر حاضر برای آیندگان این سرزمین، باید مورد نظر قرار گیرد. ساخت و نمایش مدل های فیزیکی از سازه های آبی ماندگار و یا بدیع، در میادین و پارک های شهرهای ایران پیشنهاد می گردد. .
The history of Iranian civilization is known in the world. The existence of water structures in Iran, such as dams, gangways, ashtrawls, plumbers, water mills, and mills, has been centuries old, and reflects the deepening of Iranians and their vast knowledge of water engineering at that time. Some of these works are still under exploitation; some are rebuilt and work well; some are repaired and protected, but their use has been assigned to new and similar structures. The main purpose of this paper is to introduce examples of water structures in the permanent index of Iran, the need to preserve and restructure some of the existing structures, and modernize the structures for the survival of Iran's historical heritage. Also, innovation in the design and construction of new water structures as the historical and cultural heritage of the present age for the future of this land should be considered. It is recommended to construct and display physical models of sustainable or exotic water structures in squares and parks of Iranian cities.
https://www.jecm.ir/article_48038_20bf44156e69f7d3a792217e4c693c5e.pdf
تمدن ایرانیان
سازه های آبی
سدهای باستانی
پل- بندها
قنات
per
دکتر روح اله طاهرخانی
مهندسی و مدیریت ساخت
۲۵۳۸-۱۹۰۳
۲۵۳۸-۲۵۷۸
2016-11-21
1
3
28
33
48039
مروری برانواع فیلترها از نظر مقاومت در برابر فرار مصالح در سازه های ساحلی و مقایسه آنها
A review of various types of filters in terms of resistance to evasion of materials in coastal structures and their comparison
امیر ارسلان کرمی متین
a.karamimatin@modares.ac.ir
1
مهدی شفیعی فر
2
دانشجوی کارشناسی ارشد سازه های دریایی، دانشکده مهندسی عمران و محیط زیست، دانشگاه تربیت مدرس
استاد، دانشکده مهندسی عمران و محیط زیست، دانشگاه تربیت مدرس
فیلترها در بسیاری از سازه های دریایی و هیدرولیکی برای جلوگیری از فرار مصالح و تامین زهکشی به کار میروند. فیلترها در حالت کلی از نظر مقاومت در برابر فرار مصالح بستر به سه دسته هندسه بسته، هندسه باز پایدار، هندسه باز ناپایدار تقسیم بندی میشوند. در فیلترهای هندسه بسته تحت هر مقدار بارگذاری هیدرودینامیکی، فرار مصالح رخ نمیدهد، اما در فیلترهای هندسه باز پایدار امکان فرار مصالح وجود دارد. در فیلترهای هندسه باز ناپایدار نیز مقداری فرار مصالح که مانع از وارد آمدن آسیب جدی به سازه می شود، قابل قبول است. به منظور عملکرد فیلترهای هندسه باز، مطالعات آزمایشگاهی گسترده ای تا به امروز صورت گرفته، اما هنوز هم دانش مختصری در این زمینه در دسترس است. به همین دلیل محققین حوزه هیدرولیک این روش طراحی را در سازه های ساحلی استفاده نمیکنند. لذا هم چنان در سازه های ساحلی، فیلترها به صورت هندسه بسته اجرا و طراحی میشوند. با توجه به اهمیت بسیار بالای لایه فیلتر در سازه های ساحلی، این نوشتار به بررسی پیشینه مطالعاتی در زمینه دسته بندی انواع فیلترها از نظر مقاومت در برابر فرار مصالح بستر و مقایسه آنها می پردازد.
Filters are used in many marine and hydraulic structures to prevent evacuation and drainage. The filters are generally divided into three categories of closed geometry, stable open geometry, unsteady open geometry, in terms of resistance to escape of bed materials. In geometric filters, hydrodynamic loading does not occur, but volatile geometry filters allow materials to escape. In unstable open geometry filters, some volatile evaporation that prevents serious damage to the structure is acceptable. In order to operate open-source filters, extensive laboratory studies have been carried out to date, but there is still a brief knowledge available in this area. For this reason, the researchers in the field of hydraulic engineering do not use this design method in coastal structures. So, in coastal structures, filters are implemented and designed in the form of closed geometry. Due to the high importance of the filter layer in coastal structures, this paper examines the history of studies on the classification of different types of filters in terms of resistance to the escape of bed materials and their comparison.
https://www.jecm.ir/article_48039_fff6b47c4146fea53c9c9d126cf07db4.pdf
فیلتر
فیلترهای هندسه بسته
هندسه باز
فرار مصالح
ساز ههای ساحلی